Pentair Hydromatic SHEF Series Cast Iron Effluent Pumps

Main Content Starts Here

Pentair Hydromatic SHEF Series Cast Iron Effluent Pumps

Cast iron body and oil-filled motor provide superior cooling characteristics for longer pump life.

KEY FEATURES

  • Carbon/Ceramic Mechanical Shaft Seal
  • Oil-Filled Motor With Automatic Reset Thermal Overload
  • Uses Single-Row Ball-Bearing Construction
  • Piggyback Plug Available for Easy Maintenance and Switch Replacement

WARRANTY

12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Explore purchase options available for this product.
Where to Buy

Other Product Images

OtherProductImages_Cast Iron Effluent Pumps, 3/10 HP - 1 HP
OtherProductImages_Cast Iron Effluent Pumps, 3/10 HP - 1 HP

Performance Curves

PerformanceCurves_Cast Iron Effluent Pumps, 3/10 HP - 1 HP
PerformanceCurves_Cast Iron Effluent Pumps, 3/10 HP - 1 HP
PerformanceCurves_Cast Iron Effluent Pumps, 3/10 HP - 1 HP

Specifications

BODY CONSTRUCTION:  Class 30 Cast Iron and Engineered Thermoplastic
HORSEPOWER:  Available in 3/10, 4/10, and 1/2
MAXIMUM HEAD:  See Spec Sheets (model and HP dependent)
MAXIMUM CAPACITY:  See Spec Sheets (model and HP dependent)
FLOW at 10' LIFT:  See Spec Sheets (model and HP dependent)
SWITCH TYPE:  Wide Angle Tethered Float
MINIMUM SUMP DIAMETER:  See Spec Sheets (model and HP dependent)
DISCHARGE PIPE SIZE:  1-1/2" to 2" NPT (model dependent)
MAXIMUM SOLIDS HANDLING SIZE:  3/4"
AMP DRAW (full load):  See Spec Sheets (model and voltage dependent)
CORD LENGTH:  20' SJTW
VOLTAGE:  available in 115v / 230v 
MAXIMUM LIQUID TEMPERATURE:  120°F (49°C)
MAXIMUM (intermittent) LIQUID TEMP:  120 -140 degrees F (49 - 60degrees C)
IMPELLER:  Thermoplastic Vortex

Back to top of page