Pentair Hydromatic SPD Series High-Head 1/2 & 1 HP Effluent Pumps

Main Content Starts Here

Pentair Hydromatic SPD Series High-Head 1/2 & 1 HP Effluent Pumps

Specifically designed to meet the demands of septic tank effluent applications that require a "high-head" dual seal pump.

KEY FEATURES

  • Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem
  • Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)
  • Upper & Lower Ball Bearing Construction
  • Piggyback Plug Available for Easy Maintenance and Switch Replacement
  • Optional Seal Failure Probe Warns of Seal Leak
  • Capacitor Start for Increased Starting Torque (single-phase models)

WARRANTY

12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Explore purchase options available for this product.
Where to Buy

Other product images

OtherProductImage_High-Head 1/2 HP Effluent Pumps

Performance Curves

PerformanceCurves_High-Head 1/2 HP Effluent Pumps

Specifications

Item #Horsepower
SPD50H1/2
SPD100H1
Item #Horsepower
SPD50H1/2
SPD100H1
Show less

BODY CONSTRUCTION:  Class 30 Cast Iron
HORSEPOWER:  1/2 HP
MAXIMUM HEAD:  50 ft. (15.2 m)
MAXIMUM CAPACITY:  112 GPM (7.1 LPS)
FLOW at 10' LIFT:  104 GPM
SWITCH TYPE:  Diaphragm Pressure Switch
MINIMUM SUMP DIAMETER:  Simplex: 24" / Duplex: 36"
DISCHARGE PIPE SIZE:  2" NPT (3" NPT optional)
MAXIMUM SOLIDS HANDLING SIZE:  3/4"
AMP DRAW (full load):  14 amps on 115v / 7 amps on 230v 1-phase / 3.6 amps on 208v / 3.5 amps on 230v 3-phase / 1.8 amps on 460v / 1.9 amps on 575v
CORD LENGTH:  10' SJTW (20' optional)
VOLTAGE:  Available in 115v or 208v 1-phase, OR 230v, 460v, or 575v 3-phase 60 Hz
MAXIMUM LIQUID TEMPERATURE:  140°F (60°C)
IMPELLER CONSTRUCTION:  Class 30 Cast Iron, 2-vane

Back to top of page