- Home
- Move Water
- Myers Pump Solutions
- Myers Products
- Myers Centrifugal Pumps
- Pentair Myers PQP Series Centrifugal / Sprinkler Pumps
Pentair Myers PQP Series Centrifugal / Sprinkler Pumps
Main Content Starts Here
Pentair Myers PQP Series Centrifugal / Sprinkler Pumps
Quick priming PQP Series Pump feature lightweight construction in a self-priming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump contractor.
- Fiberglass-reinforced polypropylene pump body and seal plate is lightweight, corrosion-resistant and exceptionally strong
- Drain port provided for easy winterizing
- Corrosion-resistant composite pump base
- Easy serviceable back pullout design
- 2-compartment, square flange motor with thermal overload protection
- Rapid priming once pump body is filled with water
Specifications
| Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAX LIFT | MAXIMUM DISCHARGE PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | SUCTION SIZE | DISCHARGE SIZE | AMP DRAW full load | MAXIMUM WATER TEMPERATURE | BASE | Seal Plate | Impeller | DIFFUSER | Shaft | CLAMP |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PQP Series | 90 GPM (model PQP25) | 44 GPM (model PQP15) | 25' | 60 PSI (model PQP25) | Model & Voltage Dependent | 140 F (60 C) | High-impact composite, ABS | Fiberglass-reinforced, Polypropylene | Polycarbonate | Polycarbonate | Stainless Steel | Stainless Steel | |||||
| PQP10 | Fiberglass-reinforced thermoplastic | 1 | 105 PSI | 1-1/2" NPT | 1-1/2" NPT | ||||||||||||
| PQP15 | Fiberglass-reinforced thermoplastic | 1-1/2 | 110 PSI | 1-1/2" NPT | 1-1/2" NPT | ||||||||||||
| PQP20 | Fiberglass-reinforced thermoplastic | 2 | 120 PSI | 2" NPT | 2" NPT | ||||||||||||
| PQP25 | Fiberglass-reinforced thermoplastic | 2-1/2 | 140 PSI | 2" NPT | 2" NPT |
| Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAX LIFT | MAXIMUM DISCHARGE PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | SUCTION SIZE | DISCHARGE SIZE | AMP DRAW full load | MAXIMUM WATER TEMPERATURE | BASE | Seal Plate | Impeller | DIFFUSER | Shaft | CLAMP |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PQP Series | 90 GPM (model PQP25) | 44 GPM (model PQP15) | 25' | 60 PSI (model PQP25) | Model & Voltage Dependent | 140 F (60 C) | High-impact composite, ABS | Fiberglass-reinforced, Polypropylene | Polycarbonate | Polycarbonate | Stainless Steel | Stainless Steel | |||||
| PQP10 | Fiberglass-reinforced thermoplastic | 1 | 105 PSI | 1-1/2" NPT | 1-1/2" NPT | ||||||||||||
| PQP15 | Fiberglass-reinforced thermoplastic | 1-1/2 | 110 PSI | 1-1/2" NPT | 1-1/2" NPT | ||||||||||||
| PQP20 | Fiberglass-reinforced thermoplastic | 2 | 120 PSI | 2" NPT | 2" NPT | ||||||||||||
| PQP25 | Fiberglass-reinforced thermoplastic | 2-1/2 | 140 PSI | 2" NPT | 2" NPT |