- Home
- Move Water
- Myers Pump Solutions
- Myers Products
- Myers Residential Water Supply Pumps
- Myers Jet Pumps
- Pentair Myers MPN Series Shallow Well Jet Pumps
Pentair Myers MPN Series Shallow Well Jet Pumps
Main Content Starts Here
Pentair Myers MPN Series Shallow Well Jet Pumps
MPN Series Shallow Well Jet Pumps are corrosion- and abrasion-resistant and are ideal for wells with pumping levels of 25' or less.
Self-priming after the pump housing is initially filled with water. Capacities to 18 GPM at 30 PSI.
Supplied with the industry standard 30-50 pressure switch setting
- Fiberglass-reinforced thermoplastic body provides total corrosion resistance and high resistance to abrasion
- Shallow-well jet has corrosion-resistant polypropylene nozzle and venturi
- Precision-molded impeller for perfect balance... ultra-smooth for highest performance and efficiency
- Precision-molded polypropylene diffuser allows pump to prime faster, handle more air
- Heavy-duty motor with stainless steel shaft and dual heavy-duty ball bearings
- Dual voltage capability on all horsepowers. Factory preset to 230v but can be set to 115v easily
- Pressure switch set to 30-50 PSI but adjustable
- Easy removal of a single plug allows for nozzle clean-out
- Bottom-mounted drain plug allows for easy draining and winterization
Specifications
| Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 20 PSI | MAX LIFT | MAX SHUT-OFF PRESSURE | MAXIMUM INLET PRESSURE | PRESSURE SWITCH SETTINGS | SUCTION SIZE | DRIVE SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | RECOMMENDED BREAKER | MAXIMUM WATER TEMPERATURE | Impeller | BASE | NOZZLE | VENTURI | DIFFUSER |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MPN Series | Fiberglass-reinforced thermoplastic | 18 GPM (model MPNE) | 10.2 GPM average (model MPND) | 25' | 78 PSI (model MPND) | 22 PSI | 30 - 50 PSI | 1-1/4" NPT (female) | n/a | 1" NPT (female) | 14.8 max (model MPNE on 115v) | 230v/115v Dual Voltage Motors | Depends upon Voltage and Horsepower | 140 °F (60 °C) | Engineered polymer | 10-gauge steel | Polypropylene | Polypropylene | Polypropylene | |
| MPNC | 1/2 | |||||||||||||||||||
| MPND | 3/4 | |||||||||||||||||||
| MPNE | 1 |
| Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 20 PSI | MAX LIFT | MAX SHUT-OFF PRESSURE | MAXIMUM INLET PRESSURE | PRESSURE SWITCH SETTINGS | SUCTION SIZE | DRIVE SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | RECOMMENDED BREAKER | MAXIMUM WATER TEMPERATURE | Impeller | BASE | NOZZLE | VENTURI | DIFFUSER |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MPN Series | Fiberglass-reinforced thermoplastic | 18 GPM (model MPNE) | 10.2 GPM average (model MPND) | 25' | 78 PSI (model MPND) | 22 PSI | 30 - 50 PSI | 1-1/4" NPT (female) | n/a | 1" NPT (female) | 14.8 max (model MPNE on 115v) | 230v/115v Dual Voltage Motors | Depends upon Voltage and Horsepower | 140 °F (60 °C) | Engineered polymer | 10-gauge steel | Polypropylene | Polypropylene | Polypropylene | |
| MPNC | 1/2 | |||||||||||||||||||
| MPND | 3/4 | |||||||||||||||||||
| MPNE | 1 |