- Home
- Move Water
- Berkeley
- Berkeley Products
- Berkeley Jet Pumps
- Pentair Berkeley SJH Series Stainless Steel Shallow Well Jet Pumps
Pentair Berkeley SJH Series Stainless Steel Shallow Well Jet Pumps
Main Content Starts Here
Pentair Berkeley SJH Series Stainless Steel Shallow Well Jet Pumps
ClearJet models provide excellent performance with good pressure for wells to 25' deep. Self-priming after the priming chamber has been filled with water.
- Stainless Steel Pump Body Provides Maximum Resistance To Corrosion
- Built-In Jet Made of High Strength Thermoplastic Components
- Mechanical Shaft Seal with Highly Polished Carbon-Ceramic Faces and Stainless Steel Components
- Superior Insulation Materials Protect Motor Windings Against Excessive Moisture and Contaminants
- Dynamically Balanced Rotor is Die Cast Under High Pressure For Uniform Performance and Greater Efficiency
- Heavy-Duty Ball Bearings: Shielded, Permanently Lubricated Bearings, Extensively Tested To Ensure Extended Life and Smooth, Quiet Operation
- Stainless Steel Pump and Motor Shaft Provides Maximum Corrosion Resistance; One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
- Dustproof Motor Cover Protects All Electrical Components From Dirt, Dust, and Insects. Ventilating Air Cannot Contaminate Vital Switching Components
- Quality Pressure Switch with Fixed 20 PSI Differential
Specifications
Item # | Horsepower | Voltage | MAXIMUM LIQUID TEMP | MAX INLET PRESSURE | AVERAGE PRIMING TIME AT 20 FEET | BODY | JET ASSEMBLY DIFFUSER IMPELLER | Shaft | BASE | Primary Product Attributes |
---|---|---|---|---|---|---|---|---|---|---|
17858 | Available in 3/4 or 1 HP | 115v / 230v, 60 Hz | 122 degrees F (50 degrees C) | 50 PSI | 3/4 HP: 4.2 minutes / 1 HP: 4.2 minutes | 304 Stainless Steel | NORYL (R) | One-Piece Threaded, 416 Stainless Steel | Polypropylene |
Item # | Horsepower | Voltage | MAXIMUM LIQUID TEMP | MAX INLET PRESSURE | AVERAGE PRIMING TIME AT 20 FEET | BODY | JET ASSEMBLY DIFFUSER IMPELLER | Shaft | BASE | Primary Product Attributes |
---|---|---|---|---|---|---|---|---|---|---|
17858 | Available in 3/4 or 1 HP | 115v / 230v, 60 Hz | 122 degrees F (50 degrees C) | 50 PSI | 3/4 HP: 4.2 minutes / 1 HP: 4.2 minutes | 304 Stainless Steel | NORYL (R) | One-Piece Threaded, 416 Stainless Steel | Polypropylene |